inVENTer 1505-0036, Настройка

Страница: 11 / 24

Activated components are automatically recognised and paired by the
controller. Activation of Connect system components is executed analogous
and is shown here as an example on the Connect inner cover.
 Press the push-button on the respective
component to activate:
Connect inner cover:
button inside the housing; tool
(pin
Ø
2 mm/50 mm long, e.g. small screw driver)
necessary to operate button inside housing.
FTS19-Connect outdoor:
button inside the housing.
FTS19-Connect indoor:
button on the underside of
the housing.
CS2-Connect | SK19-Connect: button on the
housing‘s front-side.

The LED lights up (1).
 Press and hold the push-button again until
the LED lights up GREEN (approx. 3 s). (2)

The component is ready for pairing with
the controller.

The LED on the component flashes
GREEN during component pairing and
lights up solid GREEN when pairing has
been completed. (3)

On the controller display, the number
shown increases with each paired system
component.

LED
3 s




