SECTION 11—TRANSPORTING
46
4. Grasp the front frame assembly on either side and slide the front frame assembly onto
the rear frame assembly.
NOTE: Lifting the front frame assembly slightly may help slide the front and rear frame assemblies
together.
5. Flip down the frame lock pin to the horizontal, locked position.
6. Install the battery box. Refer to Refer to Removing/Installing the Battery Box on
7. Install the seat. Refer to Removing/Installing the Deluxe Seat on page 31 or Removing/
Installing/Adjusting the Padded Seat on page 29.
FIGURE 11.1
NOTE: Scooter with Deluxe Seat option shown. Scooter with Padded
Seat option disassembles in the same way.
Rear Frame
Assembly
Frame Post
Front Frame
Assembly
Alignment
Pin
Frame Lock Pin
(in Locked Position)
Frame Lock Pin
(in Unlocked Position)