1.
Hold the light grey collar portion
A
of the joystick connector
B
with one hand and the controller connector
C
on the wheelchair
in the other and align them.
2.
Lightly push to engage the joystick connector and the controller
connector.
8.18
Disconnecting/Connecting the CMPJ+
Joysticks
The joystick connector is located at the rear of the seat
frame.
8.18.1
Connecting the CMPJ+ Joysticks
Ensure the gaskets
B
are installed in the top connector cap
and between network connectors
C
.
1.
Ensure the latch is pulled away from the network connector.
2.
Connect the network connector to the other connectors.
3.
Top
D
and Bottom
E
Connectors - Install connector caps onto
the network connector.
4.
Push the latch in to secure the network connectors and caps.
5.
If necessary secure excess cable using tie-wraps.
8.18.2
Disconnecting the CMPJ+ Joysticks
1.
Pull the latch
A
away from the joystick connector.
2.
Disconnect the joystick connector from the remaining
connectors.
1143190-N-03
73