SECTION 5—WHEELCHAIR OPERATION
Part No 1149267
33
TDX® SC TDX® Spree
SECTION 5—WHEELCHAIR
OPERATION
WARNING
After ANY adjustments, repair or service and before use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Set-up of the Electronic Control Unit is to be performed only by a qualified techni-
cian. The final adjustments of the controller may affect other activities of the wheel-
chair. Damage to the equipment could occur under these circumstances.
Operating the Wheelchair
Turning the Power On/Off
NOTE:
For
this
procedure,
refer
to
FIGURE 5.1.
1. To
turn
the
power
On,
perform
one
of
the
following
steps:
2. Turning
the
power
Off
can
be
achieved
by
performing
one
of
the
following
steps:
FIGURE 5.1
Turning the Power On/Off
Using the Joystick to Drive the Wheelchair
NOTE:
For
this
procedure,
refer
to
FIGURE 5.2
on
page 34.
The
joystick
is
located
on
the
joystick
housing
and
provides
smooth
control
of
speed
and
direction.
It
is
equipped
with
360
degrees
of
mobility
for
ease
of
operation.
The
joystick
is
spring
‐
loaded,
and
automatically
returns
to
the
upright
(neutral)
position
when
released.
Pushing
the
joystick
in
a
given
direction
causes
the
wheelchair
to
move
in
that
direction.
JOYSTICK
ACTION
MPJ+
Move the On/Off switch Forward to the On position.
SPJ+
Press the On/Off button.
JOYSTICK
ACTION
MPJ+
Move the On/Off switch Back to the Off position.
SPJ+
Press the On/Off button.
MPJ+ Joystick
On/Off
Switch
SPJ+ Joysticks
On/Off
Button