Accessories
The holder for the "swing-away" trunk support is
placed in the attachment
A
on the backrest
1.
Loosen the knob
B
.
2.
Place the trunk support holder
C
.
3.
Re-tighten the knob.
E
D
Tools: 5 mm Allen key / 13 mm fixed spanner.
1.
The angle can be adjusted by loosening the screws
E
and bolts
D
on the trunk support arm.
2.
Hold with the Allen key and tighten with the fixed
spanner.
3.
Remember to re-tighten the screws and bolts when the
required position is achieved.
The "swing-away" trunk support can be turned
sidewards in order to be out of the way when the
user is moving in to or out of the wheelchair.
CAUTION!
Risk of pinching
– The cover on the trunk support arm must
always be on when the chair is in use.
5.6 Trunk support — fixed arm
Height adjustment
A
B
1.
You adjust the height by first loosening the screw/screws
A
.
2.
Move the attachment
B
upwards or downwards to the
desired position.
3.
Re-tighten the screw/screws.
Tools: 5 mm Allen key
C
D
Sideways adjustment
1.
Loosen the knob
D
.
2.
Move the trunk support
C
sideways to the required
position.
3.
Re-tighten the knob
D
.
Depth adjustment — fixed cushion
E
1.
Loosen the screws
E
.
2.
Move the trunk support forwards or backwards to the
desired position.
3.
Re-tighten the screws.
Tools: 5 mm Allen key
5.7 Lateral positioning pads (for adjustable
backrest cover only)
WARNING!
Risk of trapping
– Be careful not to trap your trunk between the
two lateral positioning pads during front or
lateral transfers; when the user is moving in
the wheelchair.
1439960-D
17