Rea® Azalea®
2.5 Labels and symbols on the product
Identification label
The identification label is attached to the frame of your
wheelchair and gives the following information:
A
Manufacturer’s address
B
Date of manufacture
C
Product description
D
Seat width
E
Reference number
F
Serial number
G
Medical device
H
Serial number barcode
I
EAN/HMI barcode
J
Maximum user weight
K
Read user manual
L
European conformity
Read user manual
Indicates a hazardous situation that could
result in serious injury or death if it is not
avoided.
Posture belt information label
The posture belt has the good length, when
there’s just sufficient space for a flat hand
between body and belt.
Snap hook symbols
Depending on the configuration, some wheelchairs may be
used as a seat in a motor vehicle, some may not.
ISO 717 6-19
Tie-down positions where the restraint
system straps must be placed in case of
transporting the occupied wheelchair in a
motor vehicle. This symbol is only attached
to the wheelchair when it is ordered with the
transportation kit option.
WARNING Symbol
This wheelchair is not configured for
passenger transport in a motor vehicle. This
symbol is attached to the frame close to the
identification label.
2.6 Symbols on Electrical Version
Waste disposal and recycling
information. See section “After Use”,
“Waste disposal”
CLASS II equipment
Product with a thermal fuse
Type B
Applied Part
Applied Part complying with the
specified requirements for protection
against electrical shock according to
IEC60601-1.
Safety Isolation transformer, general
8
1488727-R
Содержание rea azalea assist
Страница 59: ...Notes...