Invacare rea azalea assist, Руководство пользователя

Страница: 20 / 60

Rea® Azalea®
WARNING!
Risk of breakage
The pressure on the foot plates might cause the
footboard to break.
– Make sure that the feet are placed as far out
as possible before the middle part is installed
or removed.
Angle adjustment footboard converter
In order to adjust the depth and angle of the
footboard converter, remove the middle section of
the footboard. See
3.13.2 Footboard converter —
Azalea Max, page 19
A
1. Adjust the angle and the depth by loosening the screw
A at the foot plate attachment.
Tools: 5 mm Allen key
2. Adjust the foot plate to the correct position.
3. Re-tighten the screw.
Do not place anything on the foot plate when the
screw is loose.
3.14 Adjusting the angle of the central
legrest
A
1. Loosen the adjustment knob
A
.
2. Hold the foot plate with the other hand.
3. Adjust to the appropriate leg angle.
4. Re-tighten the knob.
WARNING!
Risk of trapping fingers
When adjusting the foot plate, the fingers might
get trapped.
– Loosen the adjustment knob with one hand
and hold the foot plate with the other hand to
avoid trapping yours or anyone else’s fingers.
CAUTION!
Risk of damage
The legrest might cause damage to the floor.
– When the seat is tilted forwards on a chair
with a long legrest length and low seat height,
there is a risk of the legrest hitting the floor
and causing damage.
3.15 Amputee legrest
WARNING!
Risk of tipping
There is an increased risk of tipping for amputated
users.
– Use anti-tippers and/or re-balance the
wheelchair when amputee legrests are used.
3.15.1 Amputee legrest — general
A
B
C
D
1. Attach the legrests by pushing the tube at the upper
part of the legrests
A down into the tubes on the
wheelchair B .
2. Lock the legrests by turning them inwards.
3. Slacken lever
C
, on the cushion’s mounting, in order to
adjust the cushion’s angle and height.
4. Slacken screws
D
under the cushion, in order to adjust
the cushion depth.
3.15.2 Amputee legrest — Azalea Max
WARNING!
Risk of falling
Increased tip risk forward
– The user must never sit on the amputee pad.
CAUTION!
Risk of pinching
– There must not be any pressure on the amputee
support when adjusting the settings.
20 1488727-R