Invacare LiNX DLX-REM400, Руководство пользователя, Страница: 59 / 128

Usage
1. Give two short drive demands (less than one second) in
same direction to stop at a normal deceleration rate.
2. Give and hold drive demand in opposite direction
(reverse when driving forwards or forward when
driving in reverse) until mobility device stops. When
decelerating in this mode, speed decelerates at rate
determined by provider.
5.10 Emergency stop
If you press the ON/OFF button while driving, an emergency
stop is carried out. The remote powers down after this.
5.11 Operating the position lights
If you drive outside, turn on the position lights under
bad visibility conditions or darkness.
To operate the position lights, you need to stop the
mobility device.
Turn on position lights
1.
Tap Lighting control button A .
2.
Lighting button panel overlays screen.
Tap Position lights symbol
B .
Position lights turn on. Position lights telltale becomes
illuminated in the lighting dashboard.
3. Tap button C to close Lighting button panel.
If you start driving, the Lighting button panel overlay
disappears automatically and the position lights
remain turned on.
1637423-H 59