background image

Part No 1152408

1

Jasmine™ Scale JLS5

For more information regarding Invacare products, parts, and services, please visit www.invacare.com

Jasmine

™ 

Scale JLS5

NOTE:

 

Check

 

all

 

parts

 

for

 

shipping

 

damage.

 

In

 

case

 

of

 

shipping

 

damage,

 

DO

 

NOT

 

use.

 

Contact

 

carrier/dealer

 

for

 

further

 

instruction.

To

 

ensure

 

the

 

safe

 

installation,

 

operation

 

and

 

use

 

of

 

the

 

Jasmine

 

scale,

 

these

 

instructions

 

MUST

 

be

 

followed:

 

WARNING

DO NOT use this equipment without first reading and understanding these instructions. If you are 

unable to understand the Warnings, Cautions, and Instructions, contact distributor before 

attempting to use this equipment, otherwise, injury or damage may result.
The weight capacity is limited to the lowest rated capacity of any one of the components in use (i.e., 

Patient Lift, Sling or Scale). The patient’s weight MUST NOT exceed the lowest rated capacity of any 

component.
After ANY adjustments, repair or service and before use, make sure that all attaching component 

parts are secure.
The patient and sling MUST be removed from the lift during these procedures. Otherwise, injury or 

damage may result.

 

ACCESSORIES WARNING

Invacare products are specifically designed and manufactured for use in conjunction with Invacare 

accessories. Accessories designed by other manufacturers have not been tested by Invacare and are 

not recommended for use with Invacare products.

JLS5 Kit Description

JLS5 Scale Specifications

Remove the Swivel Bar or Cradle Attachment

NOTE:

 

For

 

this

 

procedure,

 

refer

 

to

 

FIGURE 1

 

on

 

page

 

2.

1. Remove

 

the

 

side

 

rubber

 

caps

 

(2

 

total,

 

1

 

per

 

side).

NOTE:

 

When

 

the

 

attaching

 

hardware

 

is

 

removed,

 

the

 

pin,

 

washer

 

and

 

o

ring

 

will

 

become

 

loose.

NOTE:

 

Support

 

the

 

swivel

 

bar

 

or

 

cradle

 

attachment

 

from

 

underneath

 

while

 

removing

 

the

 

attaching

 

hardware.

2. Remove

 

the

 

screw,

 

washer,

 

bushings,

 

top

 

rubber

 

cap,

 

nylon

 

spacers,

 

washer

 

and

 

nut

 

that

 

attach

 

the

 

swivel

 

bar

 

or

 

cradle

 

attachment

 

to

 

the

 

boom.

 

Retain

 

all

 

hardware.

Assembly, Installation and Operating Instructions

SAVE THESE INSTRUCTIONS

Description

Quantity

Jasmine Scale

1

Washers

2

Swivel Bar Pin

1

Locknut

1

Screw

1

Spacers

2

Flat Washer

1

Weight Range:

Up to 500 lbs (226.7 Kg)

Resolution:

+/- 0.2 lbs (0.1 Kg)

Display:

Liquid Crystal Digital

Automatic Power Down:

Two minutes

Size:

5-3/4 L X 3-5/8 W X 4 H

Weight:

.55 lbs

Power:

9-Volt Alkaline battery (included)

Battery Life:

Approximately 1500 readings

Temperature Range:

50° To 104°F (10° To 40°C)

Содержание Jasmine JLS5









Отзывы: