SECTION 2—INSTALLATION
6
SECTION 2—INSTALLATION
WARNING
Check ALL fasteners periodically to ensure that mechanical connections and attaching hardware
are tightened securely - otherwise injury or damage may occur.
DO NOT continue to use this product if problems are discovered. Corrective maintenance can be per-
formed at or arranged through your equipment supplier.
NOTE:
The
installation
instructions
differ
for
a
Invacare
Power
Wheelchair
with
Power
Recline
from
the
installation
instructions
for
a
manual
or
a
power
wheelchair
with
round
canes
7/8”
nominal
to
1”
diameter.
1.
Remove
any
existing
back
upholstery
or
back
system
from
the
chair
before
installation.
Refer
to
Owner’s
Manual
shipped
with
wheelchair.
2.
Install
the
back.
Refer
to
the
table
below
for
applicable
installation
and
adjustment
instructions.
TYPE OF
INSTALLATION
FOR INSTALLATION
INSTRUCTIONS, REFER TO
ADJUSTMENTS
FOR APPLICABLE
ADJUSTMENTS, REFER TO
Manual or Power wheelchair with
round canes 7/8” nominal to 1” dia.
Installing the Back on page 7.
HEIGHT - YES
DEPTH - YES
ANGLE - YES
For height adjustment, refer to
Install/Adjust the Back on the Back
Cane Mounting Assemblies on
page 8. For depth and angle adjust-
ment, refer to Adjusting the Back
Depth and/or Angle on page 9.
Invacare Power Wheelchair
w/Power Recline
Installing the Back - Invacare Power
Wheelchairs with Power Recline on
page 10.
HEIGHT - YES
DEPTH - NO
ANGLE - NO
For height adjustment, refer to
Refer to Installing the Back - Invac-
are Power Wheelchairs with
Power Recline on page 10.
