SECTION 2—INSTALLING
Part No 1143199
11
InTouch
™
Propel
™
Back
Installing/Removing the Propel Back
WARNING
The position of the Propel Back is directly related to the chair’s stability. It may be
necessary to reposition the front casters, rear wheels, back angle, and/or seat depth
before use. Use EXTREME caution when using a new seating position.
NOTE:
For
this
procedure,
refer
to
FIGURE
2.3
on
page
11.
NOTE:
To
remove
the
back,
reverse
this
procedure.
NOTE:
If
the
Propel
Back
does
not
fit
properly
on
the
back
canes,
the
back
width
may
need
to
be
adjusted.
Refer
to
Adjusting
the
Propel
Back
Width
on
page 12.
1. Align
the
back
latch
brackets
with
the
tabs
on
the
cane
mounting
brackets.
2. Push
up
the
back
latches
into
the
unlocked
position.
NOTE:
The
back
latches
on
the
back
latch
brackets
must
be
in
the
up
(unlocked)
position
to
install
or
remove
the
back
from
the
wheelchair.
3. Install
the
back
latch
brackets
onto
the
tabs.
NOTE:
Ensure
the
back
latches
rest
flush
on
the
tabs.
4. Push
the
back
latches
down
(locked
position)
to
secure
the
back
to
the
tabs.
Refer
to
Detail
“A”
of
FIGURE
2.3.
5. After
installation
and
before
use,
pull
up
on
the
back
to
ensure
it
is
locked.
FIGURE 2.3 Installing/Removing the Propel Back
DETAIL “A” - BACK LATCHES
Back
Cane
Mounting
Bracket
Cane
Mounting
Bracket
Back
Latch
Bracket
Tabs
Back
Latch
Back
Latch
Back
Latch
Bracket