manualshive.com logo in svg

Invacare Hydra C650PW, Руководство пользователя, Страница: 35 / 126

Поделиться
Скачать
Invacare Hydra C650PW Скачать руководство пользователя страница 35

 

 

Chapter 1 : Introducing SHARK  

1

1 

Introducing SHARK 

SHARK heralds the dawn of new thinking in lower cost powerchair control 
solutions. Using a dedicated power module and control unit, SHARK has none 
of the compromises that go into the design of one-box controllers - this means 
more power, unrivalled ergonomics, greater versatility and superior usability. 

• 

Features Dynamic’s breakthrough “

Chair Tamer

” technology, providing 

unprecedented chair performance, control and safety. 

• 

A number of control units are available to meet a wide range of user 
needs.  These range from optimally small, highly ergonomic units to 
units with a more traditional appearance and standard functionality. 

• 

A choice of power modules offers basic ‘drive only’ functionality up 
through sophisticated modules supporting multiple seat adjustments, 
lights, etc.  

• 

No heavy power cables running from the armrest to the motors and 
batteries. 

• 

No hot surfaces for the user to touch. 

• 

A longer and higher current delivery than equivalently rated integral 
controllers. 

• 

Superior EMC performance due to minimized power wiring. 

 

Содержание Hydra C650PW































































































































Отзывы:

Нет отзывов