manualshive.com logo in svg

Invacare HMV Highly 300, Руководство по эксплуатации и обслуживанию для владельцев, Страница: 47 / 72

Поделиться
Скачать
Invacare HMV Highly 300 Скачать руководство пользователя страница 47

SECTION 11—WHEELS AND CASTERS

Part No. 1118395

47

300 and 400

REMOVING/INSTALLING THE FRONT WHEEL

NOTE: Take note of position and orientation of wheel and mounting hardware before removing.
NOTE: For this procedure, refer to FIGURE 11.2.

REMOVING

1. Turn power OFF and remove the key from the ignition. 
2. Place the FRONT of the powered scooter UP on blocks so that the FRONT wheel is off 

the ground.

3. Remove the mounting screw, locknut and two (2) spacers that secure the FRONT 

wheel to the fork.

4. Remove FRONT wheel from fork.

FIGURE 11.2 - REMOVING/INSTALLING THE FRONT WHEEL

INSTALLING 

 

WARNING

Front wheel MUST be mounted in the correct fork mounting holes (upper mount-

ing holes for the 400 and lower mounting holes for 300) - otherwise injury may 

result.

1. Perform one (1) of the following - 

A. On 300 - Align front wheel with the lower fork mounting holes.
B. On 400 - Align front wheel with the upper fork mounting holes.

2. Using the mounting screw, locknut and two (2) spacers that secure the front wheel to 

the fork

3. Securely tighten front wheel mounting hardware.

Lower Fork Mounting 

Hole for 300

Spacer

Locknut

Fork

Mounting Screw

Spacer

Upper Fork Mounting 

Hole for 400

Front Wheel

Содержание HMV Highly 300









































































Отзывы:

Нет отзывов