Fig. 8-1 Front
Fig. 8-2 Rear
1.
Secure the mobility device at the front (1) and at the
rear (2) with the tie-down system belts.
2.
Secure the mobility device by tensioning the belts in
accordance with the tie-down system manufacturer's
user manual.
8.3.2 How the user is secured within the mobility device
CAUTION!
Risk of injury if the user is not properly secured
within the mobility device
– Even if the mobility device is fitted with a
posture belt, this is no substitute for a proper
safety belt which complies with ISO 10542 in
the transport vehicle. Always use the safety
belt installed in the transport vehicle.
– Safety belts must be in contact with the user's
body. They must not be held at a distance from
the user's body using parts of the mobility
device such as armrests or wheels.
– Safety belts must be pulled as tightly as
possible without causing the user discomfort.
– Safety belts must not be positioned while
twisted.
– Ensure that the third seat belt anchorage point
is not fixed directly to the vehicle floor, but to
one of the vehicle uprights.
1541361-N
95