Invacare Comet Series ALPINE Plus, Руководство пользователя

Страница: 38 / 64

Invacare® Comet Series
d.
TIME mode: Press right indicator key to select hour or
minutes.
Press left indicator key to change time.
3. Wait 15 seconds or press any other key except for the direction
indicator keys, to save the settings.
6.16 Adjusting the display
Activating or deactivating acoustic signals
The scooter controls can be programmed to emit an acoustic signal
in the following situations:
•
Using the horn.
•
Battery capacity low (activated in delivery status).
•
Direction indicators activated (activated in delivery status).
•
Hazard lamps activated (activated in delivery status).
•
Reverse gear activated (both reverse gear and acoustic signal
are activated in delivery status).
LED display
The controls must be switched off in order to activate or deactivate
an acoustic signal for particular functions, and a particular keystroke
combination needs to be entered when switching on again.
After a signal for a particular function has been successfully
activated/deactivated, a combination of LEDs on the battery charge
display flash as confirmation. The LEDs are numbered as shown
below.
The keystroke combinations and LED codes for various options are
as follows:
Function Keystroke
combination LED(s) Condition
2 activated Acoustic signal
at low battery
capacity Li
direction
indicator left
2+3 deactivated
4 activated Acoustic
signal when
direction
indicators
activated Li
direction
indicator right
4+5 deactivated
6 activated Acoustic
signal when
hazard lamps
activated Li
hazard lamps
6+7 deactivated
2+3+4 activated Acoustic signal
when reverse
gear activated Lighting
+ Speed
reduction
5+6+7
deactivated
Proceed as follows to activate or deactivate an acoustic signal for a
particular function:
38 1603455-A