Invacare Captain's Seat Скачать руководство пользователя страница 28

Страница: 28 / 76

Release lever located towards the front or center of
seat frame.

1. Review the safety information in

4.4 Manual Center Mount

Footrests, page 25

2. Engage the release lever with one hand (not shown) and

move the center mount footrest

to the desired angle

with the other hand.

3. Disengage the release lever (not shown) to lock the center

mount footrest in the new position.

4.4.4 Adjusting the Footplate Width of the Center
Mount Footrest

Narrow configuration shown (No Spacers)

1. Flip footplate

down

2. Remove the mounting screw

, nylon washer

, washer

and wave washer

securing the footplate to the

extension tube

of the center mount footrest

3. Reposition the four 1/4 inch spacers

between the

footplate and washer as necessary to achieve the desired
footplate width

4. Using the mounting screw, nylon washer, washer and

wave washer, secure the footplate to the extension tube.

5. Repeat STEPS 1 and 4 for the other footplate.

Fig. 4-2 Medium Narrow (One Spacer) Fig. 4-3 Medium (Two Spacers)

60101876-C

Invacare® Captain's Seat

Содержание Captain's Seat













































































Результаты поиска

Содержание Captain's Seat

Отзывы:

Invacare Captain's Seat, Руководство пользователя, Страница: 28 / 76

Результаты поиска

Содержание Captain's Seat

Отзывы: