Invacare Captain's Seat Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 76

Invacare Captain's Seat Скачать руководство пользователя страница 22

4 Setup

4.1 Setup/Delivery Inspection Information

Setup/delivery inspection should be performed by
provider at time of delivery/set up.
PROVIDERS — Refer to

9.1 Setup/Delivery Inspection,

for a setup/delivery inspection checklist.

Initial adjustments should be made to suit your
personal body structure needs and preference.
Thereafter weekly, monthly and periodic inspections
should be performed by user/attendant between the
six month service inspections. Refer to

Maintenance, page 57

4.2 Adjusting the Remote

The following information is valid for all seating systems.

CAUTION!
Risk of injury or damage

If screws are not completely tightened during
adjustments, there is a risk of the remote being
pushed backwards during an accidental collision with
an obstacle, such as a doorframe or table, and the
joystick being jammed against the armpad. This may
cause the mobility device to drive forward
uncontrollably and potentially lead to injury to the
user and bystanders or damage to the wheelchair and
surrounding objects.
-When adjusting the position of the remote, always

make sure to tighten all screws securely.

-If this should accidentally happen, immediately

switch the mobility device electronics OFF at
the remote.

CAUTION!
Risk of injury

When  leaning  on  the  remote,  for  example,
when  transferring  into  or  out  of  the
wheelchair,  the  remote  holder  may  break  and
the  user  may  fall  out  of  the  chair.
-Never  lean  on  the  remote  as  a  support,  for

example, transfer.

22

60101876-C

Invacare® Captain's Seat

«
...
20
21
22
23
24
...
»

Содержание Captain's Seat













































































Отзывы:

Нет отзывов