Invacare Bora Series, Руководство пользователя

Страница: 38 / 128

Invacare® Bora/Spectra XTR Series
5.4.4 Adjusting the angle for armrest with the flip-up
armrest
• 5 mm Allen key
1. Release the bolts to adjust the armrest angle (1) with
the Allen key.
2.
Set the angle for the armrest.
3. Re-tighten the bolts. Make sure that the Nordlock
washers used are re-inserted.
5.4.5 Adjusting the width of the flip-up armrest
• 6 mm Allen key
• 13 mm Allen key
1. Remove the rear cover held by the velcro strips.
2. Release the bolts (2) in the torque support (1) using
the Allen key. Maintain counter pressure on the nuts
(3) with the Allen key.
3. Set the width of the armrest. The possible positions
of the armrests are set using the bores in the torque
support.
4. Retighten the bolts.
5. Repeat the process on the other armrest.
5.4.6 Set the resistance of the flip-up armrest
The movement of the flip-up armrests can be set to have
greater or less resistance.
• 5 mm Allen key
38 1528224-Y