Invacare® Alegio NG
8 Technical data
8.1 Dimensions
All measurements are stated in cm. All angles are stated in
degrees. All measurements and angles are stated without
tolerances.
Invacare®
reserves the right to change the stated
measurements and angles.
8.2 Weights
Max. patient weight
(provided that the weight of the
mattress and the accessories do not
exceed 35 kg)
135 kg
Max. safe working load
(p accessories)
170 kg
Alegio NG standard bed, complete, excluding
accessories
65.0 kg
Mattress support, standard head end
14.0 kg
Mattress support with auto-regression, head
end
17.0 kg
Mattress support, foot end,
15.5 kg
Mattress support, foot end, foot motor
17.0 kg
Mattress support, foot end tight motor
17.0 kg
Base and shear arm
35.0 kg
Base
15.5 kg
Shear arm
19.5 kg
Line side rail – 1 side
4.5 kg
Line extendable side rail – 1 side
6.5 kg
Britt V side rail – 1 piece
7.7 kg
Verso II side rail – 1 piece
7.0 kg
Lisa side rail – 1 piece
17.0 kg
Lifting pole
4.2 kg
Rastofix
0.3 kg
Mattress support extension (15 cm)
1.8 kg
Bed End, Vibeke – 1 piece
6.0 kg
Bed End, Emma – 1 piece
7.0 kg
Bed End Susanne/Sophie – 1 piece
8.5 kg
Bed End, Camila – 1 piece
11.0 kg
Bed End, Sabrine – 1 piece
6.8 kg
8.3 Mattress dimensions
Allowed mattress sizes, depending on the side rail
Mattress measures (in cm)
Side rail
Height
Width
Length*
Verso ll
10 – 18
85,5 – 95
195 – 206
Line side rail
12 – 20
85,5 – 95
195 – 206
Lisa side rail
12 – 17
85,5 – 95
195 – 206
Britt V side
rail
12 – 20
85,5 – 95
195 – 206
* For beds equipped with a mattress support extension, add
15 cm.
Min. density: 38kg/m
8.4 Environmental conditions
Storage and
transportation
Operation
Temperature
-10°C to +50°C
+5°C to +40°C
Relative humidity
20% to 75%
Atmospheric
pressure
800 hPa to 1060 hPa
Be aware that when a bed has been stored under
low temperatures, it must be adjusted to operating
conditions before use.
8.5 Electrical system
Voltage supply: Uin = 230 Volt, AC, 50/60 Hz (AC =
Alternating current)
Maximum current input: Iin max. = 1 A
Intermittent (periodic motor operation): Int = max. 10%,
2 min / 18 min
Degree of protection: IPx6* or IPx4** (depending on
configuration)
The control unit, external power supply and motors are
protected according to IPx6. When the bed is equipped
with a HL80 hand control, it is protected according to IPx4
Insulation class: Class II
24
1561872-F
Содержание Alegio NG
