Invacare Action 4NG series, Руководство пользователя

Страница: 46 / 72

Invacare® Esprit Action® 4 NG
6 Controls system
6.1 Controls protection system
The wheelchair controls system is fitted with an overload
protection.
If the drive is severely overloaded over a long period of time
(for example, when driving up a steep hill) and especially
when the ambient temperature is high, the controls system
could overheat. In this case, the wheelchair performance is
gradually reduced until it comes to a halt. The status display
shows a corresponding error code (refer to Control unit and
Quick assistance on system failure chapters, ALBER esprit
user manual). By switching the power supply off and back
on again, the error code is cleared and the controls system
is switched back on. It can however take up to five minutes
until the controls system has cooled down enough for the
drive to restore full performance again.
If the drive is stalled by an insurmountable obstacle, for
example, a curb or similar which is too high, and the driver
attempts driving for more than 20 seconds against this
obstacle, the controls system automatically switches off to
prevent the motors from being damaged. The status display
shows a corresponding error code (refer to Control unit and
Quick assistance on system failure chapters, ALBER esprit
user manual). By switching off and back on again, the error
code is cleared and the controls system is switched back on.
A defective main fuse may be replaced only after
checking the entire controls system. Your authorized
dealer must perform the replacement. You can find
information on the fuse type in
10 Technical Data,
page 63 .
6.2 Battery pack
Power is supplied by 12 V battery pack. The batteries are
maintenance-free and only need regular charging.
You can find information on how to charge, handle,
transport, store, maintain, and use batteries, refer to Battery
pack chapter, ALBER esprit user manual.
46 1640502-B