Invacare Action 4NG series, Руководство пользователя

Страница: 45 / 72

Usage
5.6.1 Disengaging, re-engaging motors
CAUTION!
Risk of the mobility device running away
– When the motors are disengaged (for
push operation whilst freewheeling), the
electromagnetic motor brakes are deactivated.
When the mobility device is parked, the
coupling rings for engaging and disengaging the
motors must without fail be locked firmly into
the "POWER DRIVEN" mode (electromagnetic
motor brakes activated).
The motors may only be disengaged by an attendant,
not by the user.
This ensures that the motors are only disengaged
if an attendant is available to secure the mobility
device and prevent unintended rolling.
The coupling rings for disengaging the motors are located
on the powered drive wheels, refer to Wheels and Driving
chapters, ALBER esprit user manual.
Disengaging motor
1. Switch off control unit.
2. Rotate coupling ring A clockwise as far as it will go.
3. Release cover
B
protrudes beyond the coupling ring
and “0” is displayed in the window C .
The powered drive wheel is now disengaged. Wheel is
in “free-wheeling” mode.
4. Perform step 2 to 3 on both sides.
Re-engaging motor
1. Rotate coupling ring A until it reaches the middle stop.
2. Release cover
B
is flush with the coupling ring and “1”
is displayed in the window C .
The motor is now re-engaged. Wheel is in ”Power
Driven” mode.
3. Perform step 1 to 2 on both sides.
4. Switch on control unit.
1640502-B 45