Part No 1039644
1
Wheel Lock Extension Handle
For more information regarding Invacare products, parts, and services, please visit
www.invacare.com
Wheel Lock Extension Handle
Kit No. 1038599
NOTE:
Check
all
parts
for
shipping
damage
before
using.
In
case
of
damage,
DO
NOT
use
the
equipment.
Contact
the
Dealer/Carrier
for
further
instructions.
Safety Summary
The
following
recommendations
are
made
for
the
safe
installation
of
the
Wheel
Lock
Extension
Handle
Kit:
WARNING
DO NOT use this product or any available optional equipment without first
completely reading and understanding these instructions and any additional
instructional material such as owner’s manuals, service manuals or instruction
sheets supplied with this product or optional equipment. If you are unable to
understand the warnings, cautions or instructions, contact a healthcare
professional, dealer or technical personnel before attempting to use this equipment
- otherwise, injury or damage may occur.
Any worn or damaged hardware must be replaced.
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely.
ACCESSORIES WARNING
Invacare products are specifically designed and manufactured for use in conjunction
with Invacare accessories. Accessories designed by other manufacturers have not
been tested by Invacare and are not recommended for use with Invacare products.
NOTE:
If
installing
this
kit
on
a
wheelchair
manufactured
prior
to
5/93,
a
new
style
wheel
lock
handle
may
need
to
be
ordered.
Contact
an
Invacare
Dealer
or
Customer
Service
at
the
number
on
the
bottom
of
this
instruction
sheet.
Installing The Wheel Lock Extension Handle
NOTE:
Wheel
lock
extension
handles
cannot
be
installed
on
high
mount
wheel
locks
already
equipped
with
extension
handles.
1.
Remove
and
discard
the
existing
rubber
tip
on
the
wheel
lock
handle
(if
applicable).
2.
Remove
the
button
screw,
washer
and
locknut
that
secures
the
existing
handle
to
the
wheel
lock
assembly.
3.
Attach
the
looped
end
of
the
elastic
cord
of
the
wheel
lock
extension
handle
over
the
spacer
of
the
existing
handle.
4.
Reassemble
the
existing
handle
to
the
wheel
lock
with
the
button
screw,
washer
and
locknut
to
secure
the
cord
around
the
spacer.
Tighten
securely.
NOTE:
Cord
is
made
of
stretchable
material
and
may
be
adjusted
to
a
light
or
loose
fit
to
meet
the
needs
of
the
user.
5.
Slide
wheel
lock
extension
handle
over
existing
handle.
Assembly, Installation and Operating Instructions
SAVE THESE INSTRUCTIONS
