Place a Square Nut (Part 7) over
then end of the protruding bolt
and loosely tighten the bolt
Repeat for each of the
remaining corners so that
either side panel are loosely
connected to the A / B Clips
*The INUX3D logo designates
the REAR of the construction
Insert one of your 3.5” HDD’s
from the FRONT of the TPXDUO
with the HDD ports also facing
the FRONT
Slide the first HDD so that
the holes for the HDD Screws
(Part 5) line up between the
HDD and the TPXDuo frame
TERRAPI EXTREME DUO
Assembly Instructions Page 7 of 11
© INUX3D 2021
V1.1
