You will now position the
second B Clip DIAGONALLY
OPPOSITE from the original
B Clip
Place and attach to the Square
nut as before
Your assembly will now look
something like this. The feet are
facing upwrads
Ensure all bolt holes in The A / B
Clips are facing up and down
Ensure all cable management
slots open AWAY from the
attached side plate
Position the LEFT side panel
(Part 2) so that the feet match
the orientation of the RIGHT
side panel
Position an M4x8mm bolt
(Part 6) through the LEFT side
panel and through an end of
one of the A or B Clips
TERRAPI EXTREME DUO
Assembly Instructions Page 6 of 11
© INUX3D 2021
V1.1
