Position a B Clip (Part 4) in the
TOP REAR corner of the side
plate
There is a ‘B’ visible on the part
The two screw holes of both A
and B should now be facing
each other
Insert an M4x8 bolt (Part 6)
from the outside of the side
plate, through the B Clip and
into the Square Nut
Place a Square Nut (Part 7) into
the square recess of the B Clip.
*Square Nut colour may differ
based on availability
While holding the Square Nut
and B Clip in place, loosely
tighten the M4 bolt into the
Square Nut
You will fully tighten these
bolts once your drives are in
place
You will now position the
second A Clip DIAGONALLY
OPPOSITE from the original
A Clip
Place and attach to the Square
nut as before
TERRAPI EXTREME DUO
Assembly Instructions Page 5 of 11
© INUX3D 2021
V1.1
