Flip the assembly over and
tighten the bolt and nut
Repeat for each of the fan
corners
Locate the M2.5 nut recesses on
the INSIDE of the RIGHT side
plate (Part 1)
Press fit the 4 x M2.5 nuts
(Part 9) into the recesses. You
may need to hold each nut in
place as you insert the standoffs
in the next step
Flip over the RIGHT side plate
and screw an M2.5 x 6mm
standoff / spacer (Part 8)
through the side plate into the
M2.5 nut on the other side
Repeat for each of the
remaining standoffs
TERRAPI EXTREME DUO
Assembly Instructions Page 3 of 11
© INUX3D 2021
V1.1
