background image

© INUX3D 2022 

V1.1

Place the right side of the 
YP cage over the top of 
the YoloBox Pro and the 2 
aluminium bars 
Drop in two of the supplied 
M5x10mm bolts, into the holes 
to affix the right side of the YP 
cage onto the aluminium bars

These only need to be lightly 
tightened. You will damage the 
plastic sides if you tighten with 
force

Place your hand underneath 
the left side which is currently 
at the bottom

Flip the entire YP cage over while 
pressing the sides together so 
the left side is now on top

Drop in 2 more  M5x10mm 
bolts into the holes and 

lightly 

tighten

Position the YP cage as shown 
and note the 2x M5 slide in nuts 
you dropped in earlier
We will be attaching the top 
handle to these two T-nuts

PK1 PRO STREAMER YP

Assembly Instructions Page 3 of 5

Отзывы: