intrepid KM100, Руководство пользователя, Страница: 31 / 54

4.12.1 Transport: safety instructions
About this task
Caution:
• Do not tow the machine.
• Make sure that the machine is not exposed to external shocks, vibrations
and collisions.
• Protect the machine against external influences such as rain, splashing
(salt) water, dirt and dust.
• Use a means of transport, such as a trailer, with sufficient capacity for the
weight of the machine and the interchangeable accessory.
4.12.2 Driving on the means of transport
1. Drive the machine backwards onto the transport.
2. Position the boom as close as possible to the floor of the transport.
3. Stop the machine.
4. Make sure the machine is stable.
5. Place blocks to block the front and rear wheels.
6. Secure the machine with straps that meet the legal requirements.
7. Use the tie-down points of the machine, indicated with stickers.
4.12.3 Hoisting the machine
1. Make sure that the machine is straight, so that it is not bent.
2. Turn off the machine completely.
3. If there is a problem with the steering, fit the jib lock, see section
4.10
.
4. Only use the lifting eyes, which are marked with stickers on the machine. Use the
two lifting eyes at the top or the four lifting eyes at the base of the machine.
5. Attach the lifting equipment to the lifting eyes and take care of the following items:
• The lifting equipment do not come into contact with the hydraulic control.
• The lifting chains or belts are all equally long so that the machine stays horizontal
during lifting.
6. Lift the machine vertically.
7. Place the machine on a stable surface.
8. Remove the lifting equipment.
9. Remove the attachment tools.
10. Remove the jib lock, see section
4.10 .
4.12.4 Storage
1. Place the machine if it is temporarily out of use in an area that is protected from all
weather conditions.
Daily use
11 - 002 - 30.08.2018 31