Intrepid Control Systems RAD-Galaxy Скачать руководство пользователя страница 59

Страница: 59 / 104

RAD-Galaxy User’s Guide

Version 1.2 - November 28, 2017

Warning:

Please take heed of the warning on the firmware

update dialog box: leave the RAD-Galaxy connected and

powered on for the entire firmware update process to avoid possible

problems with the device.

4.3 General Settings and Product Details

These two areas of the RAD-Galaxy’s parameter setup provide information about the device

and allow you to perform a few basic maintenance tasks.

General Settings

After connecting to the device you will see basic information about it in the right-hand pane of

the window (Figure 60):

•

The device’s serial number.

•

The firmware versions currently in the device, and an indication if new firmware is

available.

•

A message showing that the hardware license for the device was recognized.

•

A current readout of the RAD-Galaxy’s real-time clock.

Figure 60: neoVI Explorer RAD-Galaxy General Settings

This information can be displayed again at any time by clicking the RAD-Galaxy’s name in the

explorer navigation window, or the

General Settings

entry immediately below it.

The version of the ZynQ Core firmware for the RAD-Galaxy will be shown in black if it matches

the firmware version within neoVI Explorer. If not, the current version and the newest available

Содержание RAD-Galaxy









































































































Результаты поиска

Содержание RAD-Galaxy

Отзывы:

Intrepid Control Systems RAD-Galaxy, Руководство пользователя, Страница: 59 / 104

Результаты поиска

Содержание RAD-Galaxy

Отзывы: