tiwiPro™ Installation - Quick Reference Guide
This installation reference guide outlines the steps required
to install and set up your tiwiPro™ device. For more detailed
instructions and specifications, refer to the complete tiwiPro™
Installation Manual available at inthinc™ university.
Figure 1: tiwiPro™ device installed on vehicle windshield
UnPack & VeRIfy PackaGe contents
tiwiPro™ Device
•
2-Part Liquid Adhesive (Qty:1)
•
Cable Ties (Qty: 3)
•
6/9-Pin Adapter Cable (Optional)
•
Alcohol Wipes (Qty:1)
•
2-Wire Adapter Cable (Optional)
•
6/9 Pin Cable (Optional)
tiwiPro
®
device
2-Wire Adapter Cable
(Optional)
Cable ties, Alcohol wipe, Liquid Adhesive
InthInc™ web PoRtal
You must complete the setup within the inthinc portal before
you can install the tiwiPro unit. If you do not have portal access,
contact intihnc Technical Support (1-866-294-8637 opt. 3) for
assistance.
to access the inthinc web portal:
Navigate to the inthinc portal URL:
a.
https://my.inthinc.com
Enter your
b.
User ID
and
Password
. Click
log in.
create new Vehicle Profile:
Navigate to
c.
admin > Vehicles > add Vehicle.
Complete the
d.
add Vehicle form
by entering information in the
required fields (indicated by red (*) asterisk).
IMPoRtant:
The vehicle VIN# is required to download the
vehicle-specific firmware file later in the installation process. Be
sure that the VIN# is entered accurately.
Click
e.
save
when finished.
Update the tiwiPro Device > Vehicle assignment:
Navigate to
f.
admin > Devices.
Locate the tiwiPro device in the list, and click
g.
edit.
Under the Device Assignment section, click the
h.
show vehicles for
assignment
link. A vehicle list will display.
Use the “Search” tool or scroll through the list until you locate the
i.
vehicle you are installing the device in. Select the vehicle by click-
ing the radio button next to the Vehicle ID.
Click
j.
save.
The tiwiPro device is now assigned to the vehicle and the unit can
k.
be installed in the vehicle.
PRePaRe InstallatIon locatIon
After the required information has been configured in the inthinc
web portal, the tiwiPro device can be installed in the vehicle.
For more detailed installation instructions, refer to the tiwiPro™
Installation Manual available at inthinc™ university.
Prepare Installation location:
Identify the desired installation location on the vehicle windshield.
a.
We recommend installing in the upper-left or lower-left (driver
side) corner of the windshield.
Clear windshield mounting location of any labels, stickers, or
b.
debris. You may need to use a solvent such as acetone or laquer
thinner to clean the area of any debris.
Using a clean, dry towel, thoroughly wipe the installation area,
c.
making sure the surface is clean and dry.
Use the provided alcohol wipe and thoroughly clean the installa-
d.
tion area.
Again, using a clean, dry towel, thoroughly wipe the installaiton
e.
area, making sure the surface is clean and dry.
U.S. Department of Transportation (DOT) regulations require that
the tiwiPro™ unit be installed in a fashion that it will not restrict a
driver’s view through the windshield. The entire footprint of the
unit (tiwiPro and cable) installed must be within 6 inches of the
top of the windshield.
Dot Regulated commercial Vehicles
Copyright © 2012, inthinc™ inc.
P/N 770-00007 Rev G
