Intex Truline™
intexinternational.com
6
START-UP
Inserting / Replacing Batteries
Remove the battery cover, insert the battery correctly. Close
the battery compartment. Replace the battery when this symbol
constantly blinks in the display.
· Only use alkaline batteries.
· Batteries should be removed in case of danger of corrosion, if
the device will not be used for a long time.
OPERATION
Switching ON/OFF
Press
ON
Device and laser is switched
on and ready to measure.
Holding down this key
OFF
for 2 seconds to switch the device
off, the device also switches off automatically after 3 minutes of
inactivity i.e. no key is pressed within that interval.
Clear-Key
OFF
Cancel the last action within a function (area, volume, etc.)
single measurement can be deleted step by step and
re-measured.
Reference Setting
Default measuring reference setting is the rear of the device.
FUNC
Press this key to change the reference. The reference
returns automatically to the default setting (rear reference)
after power off.