background image

(108GS)  MODEL 636G FILTER PUMP  ENGLISH  7.5” X 10.3”  PANTONE 295U  06/22/2014

108 

GS

SAVE THESE INSTRUCTIONS

English

Page 11

POOL CARE AND CHEMICALS 

CLEANING OR REPLACING FILTER CARTRIDGES

It is recommended that the filter cartridge be replaced at least every 2 

weeks.

1

.  Make sure the filter pump is turned off, then unplug the transformer power cord from the 

 

electrical socket.

2

.  Grasp a plunger valve handle. Turn the handle counter-clockwise, push down until it   

 

stops and then turn it clockwise until the plastic protruding notch anchors in the "0/1" 

 

position. Repeat for the second plunger valve. This prevents the water from flowing out  

 

of the pool.

3

.  Gently turn the top air release valve once or twice in a counter-clockwise direction. The  

 

housing cover can now be easily removed.

4

.  In a counter-clockwise direction remove the filter housing collar 

(1). 

Place it in a safe  

 location. 

5

.  Remove the housing cover 

(4).

6

.  Now remove the used filter cartridge.

•  All pools require care to keep the water clear and hygienically clean. With proper chemical  

 

control, your filter will help attain this objective. Consult your pool supply dealer for 

 

instructions regarding the proper use of chlorine, algaecide and other chemical agents  

 

required for sparkling clear water.

•  Keep pool chemicals away from children.

•  Do not replenish chemicals in pool while pool is occupied. Skin or eye irritations could  

 occur.

•  Daily pH checking and chemical treatment of the water is very important and can not be  

 

overemphasized. Chlorine, algaecide and maintenance of proper pH levels are required  

 

when filling the pool as well as during the season. Consult your local swimming pool 

 

supply store for instructions.

•  The season's first filling of the pool may have brackish water requiring extra water 

 

additives and extra filter changes. Do not allow swimming in pool until the pH level is 

 

balanced. Consult your local swimming pool supply store for instructions.

•  Keep spare filter cartridges on hand. Replace cartridges every two weeks.

•  Chlorinated water may damage lawns, gardens or shrubbery as children play in the pool  

 

and splash water outside the pool. Lawn areas underneath the pool liner will be destroyed.  

 

Note that some types of grass may grow through the liner.

•  Filter run time depends on pool size, weather and usage level. Experiment with various run  

 

times so as to produce clean clear water.

CAUTION

Concentrated chlorine solutions may damage the pool liner. Always 

follow the chemical manufacturer’s directions, and the health 

warnings.

Содержание Krystal Clear 636G
















Отзывы: