InterTest, Inc. • 908-496-8008
MZ-5 FS™ Inspection System
EM15201 Rev A
Page
22
Version 1.0 • Nov 2020
7)
Refer to Figure 26 for Camera Set Up
Figure 26 Camera Setup
8)
Click on Unity Settings to open Zoom & Focus Controls (Front Camera is manual focus, side view is
autofocus)
a. Focus:
i. Select 1 or 3 Step Macro (Close) Focus
1. Clicking on Macro will “Step” the camera by either 1 or 3 steps based on which
setting was selected.
b. Focus:
i. Select 1 or 3 Step Inf (Far) Focus
1. Clicking on Inf will “Step” the camera by either 1 or 3 steps based on which
setting was selected.
c. Zoom:
i. Slide the control to the right. Up to 10X digital zoom available
Note: Forward camera focus is set at the factory. To adjust. See Figure 38
9)
Refer to Figure 8 OSD & Grid Settings
a. OSD Setings Refer to where the text appers on the screen
i. Font
ii. Size
iii. Color
Tip: Setting the Grid to half of fvideo frame size will put a reticle on the screen.
