InterTest, Inc. • 908-496-8008
MZ-5™ FS Inspection System
EM15201 Rev A
Page
17
Version 1.0 • Nov 2020
1)
Double Click on the Docuview Program Icon
Figure 17- Computer Start Screen & DocuView Program
Refer to Figure 18 & 19
2)
Click on the Settings Tab Figure 18 & then General Settings Figure 19
a. The following Screen Shots will show how to Set up the cameras, lighting & presets
b. After selecting the camera, setting the COM ports etc. Open the “General Camera Settings” tab.
See Figure 2
i. Type in the name of the preset
ii. Set any desired flip or mirror
iii. Hit the “Save” button
iv. Repeat for both cameras
Note: The New or Update “Preset” will not show while still in Admin Mode. You must exist the program &
the update will show up.
