www.intertec.info
Operating Instructions SL BLOCKTHERM DB.A
Page 4 / 8
HOM146759307Ien-5
INTERTEC-Hess GmbH · Raffineriestr. 8 · 93333 Neustadt/Donau · Germany ·
+49 9445 9532-0 · [email protected]
NOTICE
NOTE
It is essential to pay attention to this safety advice as you
may otherwise incur material damage.
INFO
Important notes and useful additional information.
5
Safety information
CAUTION
Risk of burns from a hot surface
Attainable highest temperatures:
- Max. 160°C with T3 heating systems
- Max. 100°C with T4 heating systems
- Max. 70°C with T5 heating systems
- Max. 50°C with T6 heating systems
Do not touch device during operation! Before working on
the device, allow it to cool down first.
6
Technical Data
Protection class
IP66/IP68 1bar/30min
Rated voltage
max. 265 V AC
Permitted operating voltage
max. 275 V AC
Rated current (in compli-
ance with VDE 0298)
max. 10 A
Ambient temperature
- 60 to + 60°C
Max. permitted operating
temperature
- 60 to + 180°C
Switching capacity of fault
alarm (AM)
10 A / 275 V AC
Connecting cable
Silicone hose cable,
notch- and oil resistant, 3
x 1,5 mm²
Connecting cable AM
Silicone hose cable,
notch- and oil resistant, 5
x 1,0 mm² Ø8,5 mm
Material
Seawater-proof alu-
minium, black anodized
Mean Time Before Failure
50.000 h
Storage temperature
- 60 to + 80°C
Profile type "K" Length x
Width x Height
90 x 40 x 30
mm
Profile type "L" Length x
Width x Height
105 x 40 x 30
mm
Profile type "P" Length x
Width x Height
225 x 50 x 45
mm
INFO
You will find the precise technical data for your in-
strument on the label. You will find information on
the heating output on the data sheet.
Rated output
Rated voltage/Operating voltage
Thermostat
Temperature class
Illustration 1:
Example: SL BLOCKTHERM DBPA 150 T3 TS10
label
7
Option BLOCKTHERM ADA with
aluminium plate
Illustration 2:
SL BLOCKTHERM DLA T4 ADA
The BLOCKTHERM heater is fixed to a black anodized
aluminium plate for a better heat transfer. The plate may
be mounted anywhere on the device to be heated.
In combination with the plate only the profile type “L” is
available. See
