Toll Free: 1-800-682-3398
Ph. 423-477-4131
www.tpicorp.com
INSTALLATION INSTRUCTIONS FOR
INDUSTRIAL, COMMERCIAL AND
HEAVY-DUTY CEILING FANS
Description
H
igh efficiency ceiling fans are
ET
L certified for US and
C
anada. All
models are suitable for use with solid state speed controls.
Unpacking
1. After opening carton, look for concealed damage.
2. If concealed damage is found, immediately file claim with carrier.
IMPORTANT: READ AND SAVE THESE INSTRUCTIONS. Read carefully before at
tempting to assemble, install, operate or maintain the product described. Protect
yourself and others by observing all safety information. Failure to comply with
instructions could result in personal injury and/or property damage! Retain instruc
tions for future reference.
Grade
Model
TYPE
SIZE VOLTS/HZ AMPS WATTS RPM Down-Rod
Water and Dust Resistant Models
General Safety Information
I
A
I
Disconnect power
WARNING
supply before wiring
connections are made
to
prevent possible
electric shock or damage
to
equipment.
I
A WARNING
I
�ead an_d follow
�-
-----�-
instructions carefully.
Failure
to
comply with instructions could
result in fire, electric shock, injury
to
persons and/or damage
to
equipment.
I
A
I
Follow all
CAUTION
maintenance
procedures enclosed.
A DANGER
Failure
to
properly
ground unit could
result in severe electrical shock or death.
1. All wiring should conform to the
National Electrical Code ANSI/NFPA
70-1999 (NEC) in the United States,
CEC and local regulations.
Printed in China
TPl2020
Version 1
01/2020
2. Do not mount in an area which will
allow the ceiling fan to come in
contact with moisture.
3. Make certain the entire installation
is grounded as a precaution against
possible electrical shock.
4. Do not exceed maximum
amperage rating of the ceiling fan
as overloading can result in
damage to ceiling fan and control.
5. When wiring an electrical
appliance or device follow all elec
trical and safety codes, as well as
the most recent NEC, CEC and local
regulations and the Occupational
Safety and Health Act (OSHA).
6. Suitable for use with solid state
speed control.
Assembly
1. Remove all ceiling fan parts from
the box.
2. Tools and supplies needed - Flat and
Phillips screwdriver - 9/16" and 3/8"
open wrench or adjustable wrench,
2-3 wire nuts.
3. Install a junction box to accept the
wiring of the fan. In many cases, a
qualified electrician will be required
to install the outlet box keeping
with local electrical codes or to
meet the NEC, CEC and local
regulations.
4. For installation to open web steel
joist - use threaded J-hook as
supplied. For wood joist
construction - use J-hook with lag
threads. For attachment in concrete
drill concrete anchors into the
concrete as per specification
applicable to NEC, CEC and local
regulations.
Reversible
Reversible
120V/60H
Z
120V/60H
Z
E-56CF
E-60CF
56"
60"
Industrial
Industrial
18"
18"
0.7
0.7
85
90
290
260
