Modus-Vivendi – Shelf System
Installation
Page
1
of
6
All information including dimensions, changes in design and material are subject
to manufacturer’s change without formal notice and without obligation. Intersan
assumes no responsibility for use of superseded or voided information. Verify all
rough-in information before installation. It is the responsibility of the installer to
conform with local and national codes.
Intersan Manufacturing Company
1748 West Fillmore St., Phoenix, AZ 85007
Phone: 800-999-3101 Fax: 602-254-1776
intersanUS.com
MOD50-inst-Rev.1
Installation Instructions for models:
MVS5/MVS7/MVS10/ESxx
IMPORTANT
Read instructions entirely prior to installation.
Prior to hooking up the fixture to the water supply
make sure that all the lines are flushed thoroughly.
All wall anchors should have a pull out strength of
1000 lbs. or more.
Units should always be installed according to local
plumbing and/or electrical codes.
