Indoor Panel Unit with Linux OS
23
©202
2 INTERRA
PM2201200174AEN
IT
Product Manual
When the alarm sensor is triggered, the indoor monitor will make a loud alarm sound, and the system will enter
into the following interface as well as send an alarm message to the management centre (if the management
centre is installed in your system):
Fig. 22 :
Selection of the Sensor Type
You can see the No. and sensor type in the red colour shown at the top of the interface. For e
xample, “2: Smoke”
indicates that the smoke sensor in zone 2 is triggered.
To stop the alarm sound, input the password (the default password is 1234).
3.3.4.
Scene
Clicking the
“Scene” icon, the system will enter into the following interface :
Fig. 23 :
Scene interface of the Indoor Panel
