Interpump Hydralok HydraTouch H32, Руководство пользователя

Страница: 6 / 26

Machines manufactured by Hydralok, Bristol, UK
Machine enquiries, sales, after sales service :
Interpump Hydraulics (UK) Ltd t/a IMM Hydraulics (UK) : Kidderminster
Tel : (0)121 550 1115 / sales@immhydraulics.co.uk
6
TECHNICAL / DIMENSIONAL DATA
TECHNICAL
DATA
H32HydraTouch H50HydraTouch H50-46HydraTouch H50-6HydraTouch
Capacity
3/16”- 1¼” (4 wire) 3/16”- 2” (4 wire) 3/16”- 2” (4 wire)
And 1½” (6 wire)
3/16”- 2” (6 wire)
Motor 2.2KW 2.2KW 2.2KW 2.2KW
Gross weight
(Kg)
143 178 213 264
Voltage, Phase
and Frequency
Options
220/240-1- 50HZ or
220/240 - 380/440-3-50
Hz 225/280 – 440/480
60 Hz
220/240-1-50HZ or
220/240 - 380/440-3-50
Hz 225/280 – 440/480
60 Hz
220/240-1-50HZ or
220/240 - 380/440-3-50
Hz 225/280 – 440/480
60 Hz
220/240-1-50HZ or
220/240 - 380/440-3-50
Hz 225/280 – 440/480
60 Hz
Swaging Force 1750 KN 2509 KN 3195KN 4500 KN
Swaging Range 6 mm – 45.9 mm 6 mm – 76 mm 6 mm – 76 mm 6 mm – 82 mm
Standard Dies 16 19 22 26 30 34
40 46
16 19 22 26 30 34
40 46 52 58 64 70 16 19 22 26 30 34 40
46 52 58 64 70
16 19 22 26 30 34 40
46 52 58 64 70 76
Max Operating
Pressure
320 Bar 320 Bar 320 Bar 320 Bar
HANDLING/TRANSPORT
The machine will normally be shipped bolted to a wooden pallet. The bolts should be removed
and the machine lifted onto the work place using suitable lifting equipment.
PRELIMINARY CHECKS
Place the machine on a flat and stable base.
Where applicable, ensure that the power supply line is fitted with a differential safety breaker and
overload cut-out.
LIGHTING
The equipment does not have its own lighting and so it must be used in a suitably illuminated area.
ROUTINE MAINTENANCE
Ensure that moving parts are always lightly greased. Where applicable, check periodically that the
limit switches and emergency controls are in good working order.
At the top of the machine base, remove the oil filler cap and check that the oil level is correct.
Where necessary add oil (ISO 32 Hydraulic oil).