background image

Machines manufactured by Hydralok, Bristol, UK 

Machine enquiries, sales, after sales service : 

Interpump Hydraulics (UK) Ltd t/a IMM Hydraulics (UK) : Kidderminster 

Tel :  (0)121 550 1115  / 

[email protected]

 

P a g e

 | 

7

 

 

 

r1 

Machine Manual 

Technical / Dimensional Data 

Category 

HCL mobile Cutter 

Capacity 

1¼” 4-wire, 1½” 2-wire braided hydraulic hose 

Machine Dimensions (mm) 

467 x 387 x 486 (approx.) 

Net Weight (Kg) 

23 

Voltage 

12v / 24v DC 

Noise Level 

(Not Exceeding) 75dB(A) 

 

Unpacking from Transport 

The machine will be shipped bolted on opposing corners to a wooden pallet. The bolts should be 
removed and the machine lifted onto the work surface using suitable lifting equipment and 
guidelines. 

 

Preliminary Checks 

Ensure that the intended work surface is pre-drilled with mounting holes to bolt the machine down. 
Dimensions for mounting holes can be found in Appendix 1 – Mounting Information. 

Ensure that there is a suitable power source nearby and that the power supply line is fitted with a 
differential safety breaker and overload cut-out. 

The machine does not have any integrated lighting, so ensure that the machine is positioned in an 
area with ample lighting and that the working area is suitably illuminated. 

 

Routine Maintenance 

Ensure that moving parts are always lightly greased and free of dust and debris. 

(Where applicable) Check that limit and safety switches are operational, and that safety switches 
and emergency stop buttons are in good working order. 

 

 

Содержание Hydralok HCL Mobile


















Отзывы: