Interpack ipg RSA 2625-TB, Руководство по эксплуатации и список запасных частей, Страница: 22 / 48

RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER Setup Procedures
4-2
WARNING: MACHINE HEIGHT ADJUSTMENT REQUIRES RAISING THE MACHINE TO
ADJUST EACH LEG. FOLLOW ALL POSSIBLE SAFETY PROCEDURES
PRIOR TO AND DURING THIS PROCESS.
Note: There are etched lines on the legs for ease of leveling.
4.2 T
ABLE
L
EVELING
The Case Sealer must be installed on a near level ground.
Ensure that the machine is level and firmly on the ground (no rocking). Adjust the roller height with the four (4)
telescopic adjustment legs to accommodate conveyor heights from 24 to 30 inches.
To adjust the Case Sealer height (refer to Figure 4-2):
1. Jack up the machine to give ample room to extend the legs.
2. Using a 3/4" (19 mm) box end wrench, loosen the eight (8) M10 hex head bolts.
3. Adjust the legs to the desired conveyor height and tighten the bolts.
Figure 4-2 Table Leveling