Interpack ipg RSA 2625-TB Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 48

Interpack ipg RSA 2625-TB Скачать руководство пользователя страница 21

RSA 2625-TB RANDOM SEMI-AUTOMATIC CASE SEALER

Setup Procedures

4-1

Note: After unpacking the Case Sealer, look for any damage that may have occurred during

shipping. Should the case sealer be damaged, file a claim with the transport company and

notify your authorized Intertape distributor.

SET-UP PROCEDURES

4.1 R

ECEIVING AND

H

ANDLING

The following instructions are presented in

the order recommended

for setting up and installing the RSA

2625-TB Random Semi-Automatic Case Sealer as well as for

learning the operating functions and

adjustments

. Following them step by step will result in your thorough understanding of the machine and

an installation in your production line that best utilizes the many features built into the case sealer.

1. Lift off cover and sleeve after removing the strapping and staples at bottom.

2. Remove mounting bolts and nuts, which secure the RSA 2625-TB Random Semi-Automatic Case

Sealer to the shipping pallet.

3. Lift machine off pallet and install on your packaging line.

4. Remove machine from the pallet to the location of final installation.

Figure 4-1 Receiving and Handling

«
...
19
20
21
22
23
...
»

Содержание ipg RSA 2625-TB

















































Отзывы:

Нет отзывов