Internet Video & Imaging ViewCommander-Edge 3500, Руководство по установке

Страница: 5 / 16

5
Configuring ViewCommander-Edge
The ViewCommander-Edge will need to be configured with your specific settings
before it is deployed. A
Write Filter has been implemented on the Edge to ensure the
system starts in the same state every time.
The Write Filter
ViewCommander Edge uses a Write Filter to ensure system integrity. This causes all
changes made to the C: drive to be reset whenever the machine reboots. Whenever
you need to make a permanent change to your ViewCommander Edge system, we
recommend the following procedure:
1. Launch the ViewCommander Utility.
2. On the Write filter tab, click
“Enter Maintenance Mode”
3. The computer will restart and boot into Maintenance Mode.
4. Make the changes you want to save.
5. Launch the ViewCommander Utility.
6. On the Write filter
tab, click on “Enter Protected Mode”.
7. Your computer will reboot, and your changes will be saved.
When to Use the Write Filter in Maintenance Mode
Enter Maintenance Mode when making changes to Windows itself, such as your
Window’s password or IP Address.