Page 1
6-20P
240VAC
(18 amps trip)
6-15P
240VAC
(13 amps trip)
Figure 1
5-15P
120VAC
(15 amps trip)
IMPORTANT INSTRUCTIONS
WARNING:
To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic
precautions:
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Unplug Air Conditioner before servicing.
Use two or more people to move and install air
conditioner.
IMPORTANT NOTE TO THE OWNER
This equipment is to be serviced by professionally trained personnel only. If this equipment is improperly installed,
adjusted or altered by an unqualified person, a safety hazard may result.
IMPORTANT NOTE TO THE INSTALLER
Read this manual and familiarize yourself with the specific items which must be adhered to before attempting to
service this unit. The precautions listed in this manual should not supersede existing practices but should be
considered as supplemental information.
Transportation Damage
The carton should be checked upon arrival for any external damage. If damage is found, immediately contact selling
distributor.
Note on the delivery receipt any visible damage to unit or carton.
Unpacking the Unit
1. Open the carton.
2. Remove the literature, hardware pack, upper styrofoam shipping blocks, and styrofoam corner posts.
3. Remove the front assembly.
4. Lift the unit from the remaining carton.
5. Dispose of the cardboard and styrofoam at an approved recycle center. Check all contents for damaged or
missing parts. In case of concealed damage, notify the carrier as soon as possible preferably within 5 days.
Operating Instructions
Check the data specification plate and ensure the proper voltage and current rating for the type of power plug on the
unit is available.
DO NOT REMOVE THE GROUNDING PRONG FROM THE POWER CORD
. .See Figure 1 for the
types of acceptable plugs.
DO NOT
use an extension cord for the installation of this product. Refer to the data
specification plate for electrical requirements.
