950-0154revD - 6 - April 19, 2012
DO NOT OVER EXTEND THE FRONT COVER.
If the unit is off, pressing the Emergency push
button will start the unit in the default AUTO
mode.
Press the button again and it will stop the
unit.
Temperature is automatically set to 68 °F to 77°F
and will switch between COOL, HEAT or FAN
mode to maintain the temperature. If the
temperature goes below 68 °F the unit switches
to HEAT mode. If the temperature goes above
77 °F unit switches to COOL mode. If
temperature is in between 68 °F to 77°F the unit
runs in the FAN mode.
Notes:
1. Indoor fan does not turn off in the cooling mode when temperature set point has been
satisfied. It will continue to run to keep the room temperature consistent.
2. Indoor fan will turn off in heating mode when temperature set point has been satisfied.
3. Unit may require several minutes to confirm the condition of temperature set point and
system functions.
OPERATION OF WIRELESS REMOTE CONTROL
REMOTE CONTROL DISPLAY
PURGE
TURBO
PURGE
TURBO
PURGE
TURBO
PURGE
TURBO
PURGE
TURBO
