Datasheet No. PD60316 revA
IRMCS3012
Dual Channel Sensorless Motor Drive Platform with Integrated PFC
for Appliance Based on iMOTION
TM
Chipset
Features
IRMCF312 - iMOTION
TM
digital control IC - based
system
MCE
TM
(Motion Control Engine) - Hardware based
computation engine for high efficiency sinusoidal
sensorless control of Permanent Magnet motors
Integrated digital power factor correction (PFC)
Supports both interior and surface permanent
magnet motor sensorless control
Single shunt current feedback reconstruction
No external current or voltage sensing OP amp
circuit required
230V/1.8kW continuous power with Trench IGBT
for PFC and Integrated Power Modules for inverter
Harmonic complying EN61000-3-2 Class-A
Dual channel three/two-phase Space Vector PWM
Three-channel analog output (PWM)
Embedded 8-bit high speed microcontroller (8051)
for flexible I/O and man-machine control
JTAG programming port for emulation/debugger
I
2
C serial interface to EEPROM
MCE Designer
TM
tool for easy operation
Flexible drive configuration
RS232C interface
Over-current, over-voltage/under-voltage protection
EMI filter and switch-mode power supply included
Product Summary
Continuous input power 1.8 kW*
Continuous output current
6.0 Arms*
Maximum motor 1 overload output current
20 Apeak**
Maximum motor 2 overload output current 0.9 Apeak**
Maximum Internal clock (SYSCLK)
128 MHz
Sensorless control computation time
11
μ
sec typ.
RAM loaded from external EEPROM
48 Kbytes
Data RAM
8 Kbytes
A/D input channels
5
A/D converter resolution
12 bits
A/D converter conversion speed
2
μ
sec
8051 instruction execution speed
2 SYSCLK
Analog output (PWM) resolution
8 bits
RS232C baud rate (typ.)
57.6 Kbps
* Upgradeable to higher current with larger heat sink
** Changeable by modifying the hardware.
Description
IRMCS3012 is a reference design platform for IRMCF312, a high performance RAM-based motion control IC designed
primarily for appliance applications, up to 1.5kW continuous input power. It’s mainly aimed to achieve simple, low cost and
high performance solutions for advanced appliance motor control. It consists of an active PFC frond-end and two inverter
stages, all of which are controlled by the IRMCF312 digital IC
simultaneously. The power stage c
ontains a Trench IGBT
(IRGB4063PbF) for the PFC and an integrated power module (IRAMX16UP60A-2) for the first inverter, and another
integrated power module (IRAM336-025SB) for the second inverter, which are part of iMOTION
TM
chipset. Users can readily
evaluate high performance sensorless control with MCEDesigner
TM
software without spending development effort usually
required in the traditional DSP or microcontroller based system. The complete B/Ms, schematics and layout are provided so
that the user can adapt and tailor the design per application needs.
This document is the property of International Rectifier and may not be copied or distributed without expressed consent.