background image

INSTALLATION INSTRUCTIONS

Gas Furnace: (F/G)9MVE

440 01 4400 03

55

Specifications subject to change without notice.

Table 16

 

MAXIMUM EQUIVALENT VENT LENGTH

 - Feet (Meters)

Note: 

Maximum Equivalent Vent Length (MEVL) does NOT include elbows or terminations.

Use DEDUCTIONS FROM MEVL 

 Table 15 

to determine allowable vent length for each application.

Note: 

Vent sizing for Canadian installations over 4500 ft. (1370 M) above sea level are subject to acceptance

by the local authorities having jurisdiction.

Altitude

FT (M)

Unit Size

DIRECT VENT (2-PIPE) AND NON-DIRECT VENT (1-PIPE)

Vent Pipe Diameter

1-1/2

2

2-1/2

3

4

4501 to 5000

(1370 to 1524)

40,000

33

(10.1)

171

(52.1)

196

(59.7)

NA 

2

NA

60000

20

(6.1)

111

(33.8)

198

(60.4)

221

(67.4)

NA

80,000

13

(4.0)

54

(16.5)

146

(44.5)

195

(59.4)

216

(65.8)

100,000

NA

16

(4.9)

91

(27.7)

200

(61.0)

222

(67.7)

120,000

NA

NA

NA

80

(24.4)

211

(64.3)

140,000

 4

NA

NA

NA

60

(18.3)

134

(40.8)

5001 to 6000

(1524 to 1829)

40,000

27

(8.2)

158

(48.2)

179

(54.6)

NA

NA

60,000

16

(4.9)

103

(31.4)

186

(56.7)

207

(63.1)

NA

80,000

11

(3.4)

49

(14.9)

137

(41.8)

183

(55.8)

200

(61.0)

100,000

NA

12

(3.7)

85

(25.9)

188

(57.3)

208

(63.4)

120,000

NA

NA

NA

74

(22.6)

199

(60.7)

140,000

 4

NA

NA

NA

50

(15.2)

109

(33.2)

6001 to 7000

(1829 to 2134)

40,000

21

(6.4)

145

(44.2)

162

(49.4)

NA

NA

60,000

13

(4.0)

96

(29.3)

174

(53.0)

194

(59.1)

NA

80,000

NA

44

(13.4)

120

(36.6)

171

(52.1)

185

(56.4)

100,000

NA

10

(3.0)

79

(24.1)

178

(54.3)

195

(59.4)

120,000

NA

NA

NA

68

(20.7)

187

(57.0)

140,000

 4

NA

NA

NA

41

(12.5)

87

(26.5)

7001 to 8000

(2134 to 2438)

40,000

15

(4.6)

133

(40.5)

146

(44.5)

NA

NA

60,000

10

(3.0)

89

(27.1)

163

(49.7)

181

(55.2)

NA

80,000

NA

40

(12.2)

120

(36.6)

159

(48.5)

170

(51.8)

100,000

NA

NA

73

(22.3)

167

(50.9)

182

(55.5)

120,000

NA

NA

NA

62

(18.9)

175

(53.3)

140,000

 4

NA

NA

NA

32

(9.8)

63

(19.2)

8001 to 9000

(2438 to 2743)

40,000

10

(3.0)

121

(36.9)

130

(39.6)

NA

NA

60,000

7

(2.1)

82

(25.0)

152

(46.3)

168

(51.2)

NA

80,000

NA

35

(10.7)

111

(33.8)

148

(45.1)

156

(47.5)

100,000

NA

NA

67

(20.4)

157

(47.9)

170

(51.8)

120,000

NA

NA

NA

56

(17.1)

164

(50.0)

140,000

 4

NA

NA

NA

23

(7.0)

42

(12.8)

9001 to 10,000

(2743 to 3048)

40,000

5

(1.5)

110

(33.5)

115

(35.1)

NA

NA

60,000

NA

76

(23.2)

142

(43.3)

156

(47.5)

NA

80,000

NA

31

(9.4)

103

(31.4)

137

(41.8)

142

(43.3)

100,000

NA

NA

62

(18.9)

147

(44.8)

157

(47.9)

120,000

NA

NA

NA

51

(15.5)

153

(46.6)

140,000

 4

NA

NA

NA

16

(4.9)

20

(6.1)

* Not all families have these models

NOTES:

1. Use only the vent pipe sizes shown for each furnace. It is NOT necessary to choose the smallest diameter pipe possible for

venting.

2. NA = Not allowed. Pressure switch will not close, or flame disturbance may result.
3. Total equivalent vent lengths under 10 ft. for 40k BTUH furnaces from 0 to 2000 ft (0 to 610m) above sea level require use of

an inducer outlet choke. Failure to use an outlet choke may result in flame disturbance or flame sense lock

out.

4. Not all furnace families include 140,000 BTUH input models.
5. Vent sizing for Canadian installation over 4500 ft. (1370 m) above sea level are subject to acceptance by local authorities having

jurisdiction.

6. Size both the combustion air and vent pipe independently, then use the larger size for both pipes.
7. Assume two 45

°

 degree elbows equal one 90

°

 degree elbow. Wide radius elbows are desirable and may be required in some

cases.

8. Elbow and pipe sections within the furnace casing and at the vent termination should not be included in vent length or elbow

count.

9. The minimum pipe length is 5 (1.5) linear feet (meters) for all applications.

10. Use 3

in (76 mm) diameter vent termination kit for installations requiring a 4

in (102 mm) diameter pipe.

Содержание F9MVE

























































Отзывы: