Intermec SG20T1D, Руководство пользователя

Страница: 52 / 62

Chapter 5 — Troubleshooting and Maintaining the SG20T
42 SG20T Tethered Scanner User’s Guide
When the firmware download is complete, the “Operation
successful” message appears.
10 Click Finish . You have successfully upgraded your scanner
firmware.
Scanner Recovery
If something happens to your scanner and it does not turn on despite
using the correct cables and power supply, the only way to recover the
scanner is to reinstall the firmware. This is only possible with a
download cable. Please contact your Intermec representative.
Cleaning the SG20T
Clean the scanner window as often as needed for the environment in
which you are using the SG20T. To clean the scanner window, you can
use soapy water or isopropyl alcohol.
To clean the scanner window
1 Dip a clean towel or rag in soapy water or isopropyl alcohol and
wring out the excess. Wipe the scanner window. Do not allow any
abrasive material to touch the window.
2 Wipe dry with a lint-free cloth.
Note: If the firmware download is not successful, you must restart the
firmware download procedure.
Opening the SG20T voids the warranty and may cause damage to
the internal components.