6400 Vehicle Dock Installation Instructions
2
2--1
1
S
Se
eccttiio
on
n 2
2
Installation
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
IIn
nttrro
od
du
uccttiio
on
n
This section provides detailed instructions for mounting the vehicle
dock on to a motorized load-handling piece of equipment such as a
forklift. During this installation the power cable is wired directly to the
vehicle battery or bank of batteries.
When the installation is complete, you will have a secure place to store
the computer. In addition, the vehicle electrical system provides power
to recharge the batteries in your hand-held computer.
"
NOTE:
Norand Corporation is not responsible for loss or damage to the hand-held
computers or docks resulting from improper installation.
"
NOTE:
Mounting bracket and bracket installation hardware are not provided in this kit.
Two separate autoranging dc-dc power supply converters are available
to accept a wide range (12 V dc or 24.0-48 V dc) of input voltages. In
general, the low-range converter is intended for propane-fueled fork-
lifts, or delivery vehicles with 12 volt power system, while the high-
range converter is intended for other models.
B
CAUTION:
If the overall vehicle voltage exceeds 48 volts, you must tap into the bank of
batteries at a point that is 48 volts or less.
