manualshive.com logo in svg

Intermec EasyCoder E4, Руководство программиста, Страница: 70 / 122

Поделиться
Скачать
Intermec EasyCoder E4 Скачать руководство пользователя страница 70

EasyCoder E4 Direct Protocol v2.10 – Programmer’s Reference Manual

68

 Chapter 8

File Handling

1. Reading the Printer Memory

There are a number of commands for reading the printer’s 
memory and returning the information to the host. This requires 
a working two-way serial communication (see 

SETSTDIO

 in 

Chapter 6.1):

? FRE (1)

? FRE (2)

Returns the number of free bytes in the printer’s RAM memory (1) or 
the printer’s Flash memory (2).

FONTS

Returns the names and size of all fonts fi les stored in the printer’s 
memory, followed by a list of the bitmapped fonts retained for 
compatibility with other EasyCoder printers (see Chapter 4.3). It also 
returns information on the total memory used.

IMAGES

Returns the names of all image fi les (in .PCX format) stored in the 
printer’s memory. It also returns information on the total memory 
used.

FILES 

["<RAM:>|<ROM:>|<CARD1:>|<CARD2:>"]

Returns the names and size of all fi les in the printer’s RAM memory 
(default) or optionally in the ROM memory ("ROM:") or in an 
inserted DOS-formatted memory card ("CARD1:|CARD2:"). It will 
also return the the total number of used bytes in the RAM memory.

Содержание EasyCoder E4



























































































































Отзывы:

Нет отзывов